FUSING MACHINE CLEANER S-823

450ml

Preserves and reduces further sticking of adhesives to Teflon-coated belts and plates. Contains highly viscous silicone.

DIRECTIONS

Shake can before use. Spray 6'-9' (15-20cm) from surface. For best results, use on a warm surface. Spray till surface is completely covered. Allow 1 to 2 minutes for cleaning process to work. Remove residue with soft, absorbent cloth. Repeat procedure if necessary.

WARNING; CONTAINS: Use with adequate ventilation. Avoid contact, with eyes and skin In case of eye contact, flush immediately with plenty of water for at least 15 minutes. If discomfort persists, see a physician. Inhalation may cause dizziness and drowsiness. Prolonged skin exposure may cause irritation and dermatitis. If ingested, do not induce vomiting, take to physician. Do not puncture or incinerate container. Do not expose to heat at store at temperatures above 120 degrees Fahrenheit as container may burst Avoid prolonged exposure to sunlight

KEEP OUT OF REACH OF CHILDREN.

Net Content: 450 cc.